SOLID C-BAND BAND 5G PASS FILTER

• Rejects terrestrial interference in C-Band (5G, Telecom Radar, and C-Band transmitter)

• Easily installed between the feed and LNB

• Suitable for use with Norsat’s C-Band LNBs

• Environmentally sealed and moisture resistant

SPECIFICATIONS  -

Frequency Range 3.70 to 4.20 GHz

VSWR 1.4: 1 max.

Insertion Loss in Band 0.5 dB max.

Rejection -

25 dB min at 3.650 GHz and 4.250 GHz

60 dB min at 3.550 GHz and 4.350 GHz

70 dB min at 3.500 GHz and 4.400 GHz

Group delay variation within +/-0.5MHz 0.6 sec

Weight -  550 g

FAQs-

What is C-Band filter?

as well as 3.4–4.2 and 4.5–4.8 GHz. The twin passbands of 3.4 - 4.2 GHz and 4.5 - 4.8 GHz are shielded against possible interference arising between these bands by this bandstop filter.

Why is bandpass filter used?

A bandpass filter in a receiver lets signals at desired frequencies pass through while blocking signals outside of that range from being heard or processed. Frequencies outside of the receiver's tuned band can cause the device to become overloaded or malfunction.

What is band pass filter?

A band-pass filter is an electronic component arrangement that lets only electrical waves falling into a specific range or band pass through while blocking all other waves.

How does a band filter work?

Optical bandpass filters are those that use absorption, reflection, or both to block undesirable frequencies while allowing a specific spectrum of light to pass through a substrate. These can be used to send signals across a variety of frequencies, ranging from extremely narrow to extremely wide.